Bundle: IP65-Connection box and Shelly PLUS UNI
This universal connection box enables convenient adaptation and control of a Shelly UNI or PLUS UNI in an IP65 housing.
A built-in transformer (230V) supplies the circuit board with the necessary power;
The
potential-free outputs of the Shelly are connected to 16A relays with
230V. The control unit thus enables the direct connection of 230V
consumers up to max. 3600Watt.
All inputs and outputs have been adopted and adapted using a terminal strip.
Four cable glands with seals protect the electronics from moisture.
Developed and manufactured in Germany.
Quick and easy installation without soldering!
It has never been easier to utilize the possibilities of a Shelly UNI / PLUS-UNI
in a practical way!
Whether
as a temperature sensor, light sensor, soil moisture sensor, fill level
sensor, to control the valves for garden irrigation, battery
monitoring, etc.
The possibilities are almost endless, depending on which sensors you connect.
And all this in a weatherproof housing, including relays that can switch 230V consumers directly.
Important notes:
-A Shelly UNI or PLUS UNI is also required and (if required) a corresponding sensor
(e.g. DS18B20 for temperature measurement).
-The box should not be installed in a place with permanent, strong sunlight to avoid excessive heating in the housing!
-The
Shelly UNI (for which this box was developed) is no longer manufactured
by Shelly. However, you can also connect a Shelly PLUS UNI.
The only
difference is that the “count connection” of the PLUS UNI must be
connected separately and the inputs on the PLUS UNI switch via minus
(see enclosed connection instructions).
Technical data:
- Power supply : 230V AC 50Hz
- Outputs : 2x230V each max. 16A
- 2x LEDs for switching status of the relays
- all inputs and outputs of the Shelly board can be connected directly
- Dimensions : 125mm x 115mm x 59mm
Product information:
The
Shellys shown and other items not expressly named in the item
description are for illustrative purposes only and are NOT included in
the scope of delivery.
Unless otherwise stated, the item price always refers to 1 piece,
even if the product picture shows several
devices are shown!
Errors and changes excepted.
A built-in transformer (230V) supplies the circuit board with the necessary power;
The
potential-free outputs of the Shelly are connected to 16A relays with
230V. The control unit thus enables the direct connection of 230V
consumers up to max. 3600Watt.
All inputs and outputs have been adopted and adapted using a terminal strip.
Four cable glands with seals protect the electronics from moisture.
Developed and manufactured in Germany.
Quick and easy installation without soldering!
It has never been easier to utilize the possibilities of a Shelly UNI / PLUS-UNI
in a practical way!
Whether
as a temperature sensor, light sensor, soil moisture sensor, fill level
sensor, to control the valves for garden irrigation, battery
monitoring, etc.
The possibilities are almost endless, depending on which sensors you connect.
And all this in a weatherproof housing, including relays that can switch 230V consumers directly.
Important notes:
-A Shelly UNI or PLUS UNI is also required and (if required) a corresponding sensor
(e.g. DS18B20 for temperature measurement).
-The box should not be installed in a place with permanent, strong sunlight to avoid excessive heating in the housing!
-The
Shelly UNI (for which this box was developed) is no longer manufactured
by Shelly. However, you can also connect a Shelly PLUS UNI.
The only
difference is that the “count connection” of the PLUS UNI must be
connected separately and the inputs on the PLUS UNI switch via minus
(see enclosed connection instructions).
Technical data:
- Power supply : 230V AC 50Hz
- Outputs : 2x230V each max. 16A
- 2x LEDs for switching status of the relays
- all inputs and outputs of the Shelly board can be connected directly
- Dimensions : 125mm x 115mm x 59mm
Product information:
The
Shellys shown and other items not expressly named in the item
description are for illustrative purposes only and are NOT included in
the scope of delivery.
Unless otherwise stated, the item price always refers to 1 piece,
even if the product picture shows several
devices are shown!
Errors and changes excepted.